Panel Schedule Builder
Draft a circuit directory for 110.22 / 408.4. Spaces are numbered odd left, even right. Load totals use actual connected load you enter on each circuit, never the sum of breaker handles. A connected-load total is not a NEC 220 service or feeder demand calc - use the Load Calc for sizing, and the Generator Size Calculator when a standby generator is in play.
Breaker
Name palette fills the first circuit. Choose Custom to type a name.
Add a connected-load entry
Totals use only these entries. Helpers fill a load line; they do not change the handle rating unless you also edit amps.
Motor helper uses Tables 430.248 / 430.250, not the nameplate. See the Motor Calculator.
Reference only — not engineering, legal, or code-compliance advice. Results are estimates for qualified persons and must be verified against the NEC edition adopted where the work is done (your selected edition), manufacturer instructions, and the local AHJ. Use is subject to the Terms of Use & Disclaimer. — Morningstar Electric LLC